Industry News - LenoRF Industry co.,Ltd.

Industry News

You are here: Home » News » News » Industry News

RF Connector Torque Guide: Correct Tightening Torque for SMA, N, 3.5 mm, 2.92 mm, and 4.3-10
2026-04-28

You need the right torque for every rf connector to protect your equipment and keep rf signals strong. For SMA and N connectors, use 10 to 13 inch-pounds. This table helps you see the standard values for each connector:Connector TypeTorque Value (inch-pounds)SMA10 to 13N10 to 133.5 mmN/A2.92 mmN/A4.
Phase Stable Cable vs Phase Matched Cable: Key Differences, Applications, and Selection Tips
2026-04-21

You should understand the difference between phase stable cable and phase matched cable. This helps your system work the way you want. Phase stable cable keeps the phase steady even when things change. Phase matched cable makes sure signals arrive at the same time in many cables. Picking the right c
50 Ohm vs 75 Ohm RF Connectors
2026-04-14

You might ask what makes 50 Ohm and 75 Ohm rf connectors different. The biggest difference is how they deal with signal loss and power. People use 50 Ohm connectors in business because they do better with high frequencies. Most home electronics use 75 Ohm connectors since they lose less signal over
Can SMA Mate with 2.92 mm or 3.5 mm Connectors? Compatibility, Risks, and Best Practices
2026-03-26

You can connect an SMA connector to a 2.92 mm or 3.5 mm connector, but there are risks. In high-frequency rf uses, the signal can get worse if you use a high-quality male connector with a low-quality female connector. If you use a low-quality male connector, you might break important parts. The qual
4.3-10 vs 7/16 DIN: Which Low-PIM Connector Should You Use for Modern Base Stations?
2026-03-23

If you want the best low-PIM performance in new base stations, you should pick the 4.3-10 RF connector. This connector gives better electrical performance and lower PIM. It helps keep your signal strong and steady. Low-PIM is important because it stops unwanted interference. Interference can make ne
RF Connector types: SMA vs N-Type vs BNC vs TNC and which is right for your application
2026-03-23

You need to choose the right RF connector for your project. SMA connectors are good for high-frequency jobs like WiFi, GPS, and radio astronomy. N-Type connectors are best for outdoor and high-power systems. They work well with antennas and base stations. BNC connectors are used for quick-connect jo
A 28-nm CMOS Breakthrough for 6G: Compact 90–180 GHz Power Amplifier Achieves Octave Bandwidth And High Output Power
2025-12-21

As 6G communications accelerate toward the terahertz regime (above 100 GHz), the 90–180 GHz spectrum has emerged as a key frequency range for enabling ultra-high-speed data transmission beyond 100 Gbps and high-precision terahertz sensing. However, power amplifiers operating in this band have long f
RF Connectors for Base Stations and Antenna Systems
2025-07-22

RF connectors play a vital role in the performance and reliability of every base station and antenna system. The right connector choice can boost signal integrity, improve system uptime, and set the stage for future upgrades. Engineers now see a 67% link between connector quality and system bandwidt
Is BNC Cable the Same as Coax Cable?
2025-07-16

You might wonder if BNC cable and coax cable are the same thing. Coax cable serves as the foundation for many signal transmission systems, but you often need connectors to make proper connections. The bnc connector attaches to coax cable to create secure links for video or data signals.
How to Convert dBm to Watts?
2025-07-09

dBm to Watts ConversionFormulaWhen you work with RF signals or wireless systems, you often see power levels written in dBm. To use these numbers in real-world calculations, you need to convert dBm to watts. The standard dBm to watts formula looks like this:P(watts) = 10^((P(dBm) - 30) / 10)P(watts)

English

Quick Links

Products

Contact Us