In addition to the requirement of low attenuation and low standing wave ratio, the phase stable cable constant of the cable caused by temperature change and mechanical stress change should be smaller. That is, phase stable cable should be smaller.The following is a list of the catalog：Design points
The consumer electronics, automotive electronics, and communications terminal market is increasing rapidly, and the world's connector production capacity continues to shift to Asia and China. At present, Asia has become the 2.4mm connector market that has the most potential for progress in the addre
The most characteristic indicator of Phase Stable Cable Assemblies is phase stability. It is the amount of change in the electrical length of the cable assembly when its own and environmental conditions change. Phase Stable Cable Assemblies are the magnitude of the change in the electrical length of
RF connectors, that is, RF coaxial connectors, are usually considered to be mounted on the cable or installed on the instrumentation of a component, as the transmission line electrical connection or separation of components. 2.4mm connectors belong to the electromechanical integration of products, t
Introduction of 1.85 adapters and whether the need to unplug it after use1.85 adapter is an interface converter, which can be a stand-alone hardware interface device that allows hardware or electronic interfaces to be connected to other hardware or electronic interfaces, or it can be an information interface.
The role of the 1.85 adapters and how to solve it by showing not connected1.85 adapter is an interface converter, which can be a standalone hardware interface device that allows hardware or electronic interfaces to be connected to other hardware or electronic interfaces, or it can be an information interface.
Solderless 1.85mm connector PCB connection method introduction and precautionsThe solderless 1.85mm connector PCB has a solderless compression mount for quick and easy installation. Screws for mounting are included. SMA, 2.92mm, 2.4mm, and 1.85mm connectors are available.
Solderless 1.85mm connector PCB angled features, considerations, and applicationsSolderless 1.85mm connector PCB angled provides low return loss values for frequencies up to 110 GHz. These 30° angled connectors are designed for single or multi-layer printed circuit boards (PCB) where the microwave layer is on top.
Market directions, features, and mechanical properties of 1.85 RF connectorsIn the RF and microwave industry, many types of coaxial connectors are designed for specific uses and applications. 1.85 RF connectors are smaller in size and operate at frequencies up to GHz and millimeter wave range.
Coaxial 1.0mm, 1.85mm, 2.4mm, 2.92mm, 3.5mm each connector introduction and differences1.0mm/1.85mm/2.4mm/2.92mm/3.5mm, their form factor is very similar. But the applicable frequency range, manufacturing process, body material, inner conductor gold plating thickness, and form factor are different.
Our company, Zhejiang LenoRF Industry co. LTD, occupies an area of 30 hectares and is equipped with world class equipment to make millimeter wave connectors and phase stable cables. We specialize in coaxial connectors, cable assembly, and passive devices. Our current products are the latest millimeter wave connector and phase stable cable on the market.