News - LenoRF Industry co.,Ltd.

News

You are here: Home » News

Usage of Phase Stable RF Coaxial Cable
2024-03-23

Phase Stable RF Coaxial Cable is a cable that has two concentric conductors. The conductor and shield share the same axis. The most common Phase Stable RF Coaxial Cable consists of a copper conductor isolated by an insulating material, with a looped conductor and insulator on the outside of the inne
Low Loss Phase Stable Cable's basic structure and advantages
2024-03-20

Low Loss Phase Stable Cable, referred to as Phase Stable Cable is a high-tech product in the field of RF cables. It uses microporous PTFE tape-wrapped insulation, silver-plated copper foil wrapped with a braided outer conductor, and FEP sheath structure form, with low loss, high phase stability, and
Introduction of Phase stable cable
2024-03-19

Phase stable cable is most often used in the military industry. For example phased array radar, missiles, ships, electronic countermeasures, etc. For example, phased array radar or missile equipment deployed in the plateau area, due to the great temperature difference between day and night on the pl
Overview of VNA test cable and calibration methods
2024-03-17

In today's competitive electronics industry,VNA test cable reliability is critical for applications using microwave/RF cable assemblies, which need to ensure consistent, repeatable test results and maintain reliable electrical performance over time. Therefore, cable assemblies must be durable enough
Low Loss Phase Stable Cable introduction, features and applications in the aerospace field
2024-03-14

Low Loss Phase Stable Cable (referred to as phase stabilization cable) belongs to the field of RF cables with high technology content products. It has a wide frequency band, low standing wave, low loss, good uniformity, phase stability (including temperature changes and bending when the cable phase
Design Guidelines and Key Specifications for Phase Matched RF Cables
2024-03-08

Design Guidelines and Key Specifications for Phase Matched RF CablesThe proper selection of Phase Matched RF Cables should take into account not only the frequency range, VSWR, insertion loss, etc. But also the mechanical characteristics of the cable, the environment in which it will be used, and th
Phase Stable Cable Assemblies Phasing Solution
2024-03-06

Based on the analysis of the mechanism affecting the phase consistency and the experience, we discuss the phase matching method and the specific steps of RF Phase Stable Cable Assemblies as follows. Then we obtain an efficient solution for the manufacturing of phase-matching assemblies.The following
Design points and applications of phase stable cable
2024-03-03

In addition to the requirement of low attenuation and low standing wave ratio, the phase stable cable constant of the cable caused by temperature change and mechanical stress change should be smaller. That is, phase stable cable should be smaller.The following is a list of the catalog：Design points
2.4mm Connector Market Status Analysis
2024-02-28

The consumer electronics, automotive electronics, and communications terminal market is increasing rapidly, and the world's connector production capacity continues to shift to Asia and China. At present, Asia has become the 2.4mm connector market that has the most potential for progress in the addre
Stability and Factors of Phase Stable Cable Assemblies
2023-08-17

The most characteristic indicator of Phase Stable Cable Assemblies is phase stability. It is the amount of change in the electrical length of the cable assembly when its own and environmental conditions change. Phase Stable Cable Assemblies are the magnitude of the change in the electrical length of

English

Quick Links

Products

Contact Us