How to choose cable assembly First, What's is cable assembly, In this article, we only think that's RF cable assembly. Also, we call it RF cable jumper too. Usually, cable assembly has two RF connector and one coaxial cable. The purpose transmit microwave signal. It's widely used in the antenna

Return loss and VSWR (Voltage Standing Wave Ratio) are measurements for the same parameters; they have a logarithmic transition; see this link for a comparison table of return loss and VSWR.The return loss is an important parameter of an RF connector; as the value increases, the signal loss decrease

Definitely. SMA, 3.5mm, and 2.92mm (K) connectors can all be mated to each other due to their shared mechanical properties. However, the connection is not perfect and does lead to decreased electrical performance because the dimensions of each connector are slightly different.

RF connectors of the SMA (Sub-Miniature Version A) kind are commonly utilized in microwave applications. They are frequently used for frequencies up to 18 GHz and have a distinctive screw-type coupling mechanism. Small-sized SMA connectors are frequently seen in wireless communication and microwave

The International Electrotechnical Commission (IEC), that prepares and publishes international standards for all electrical, electronic, and related technologies. MIL-STD-348A: Military Standard, Radio Frequency Connector Interfaces for MIL-C-3643, MIL-C-3650, MIL-C-3655, MIL-C25516, MIL-C-26637, MIL-PRF-31031, MIL-PRF-39012, MILPRF-39030, MIL-PRF-49142, MIL-PRF-55339, and MIL-C83517.